Energy is the most important element in the modern world. Therefore, it has consumed a vast amount of energy. Fossil fuels are the most sources of energy used worldwide. These sources cause carbon dioxide emissions and this leads to the problem of climate change. Because of this problem, the world needs to move to renewable sources of energy. The fact...
291
Introduction As the global community grapples with environmental degradation and climate change, the shift towards renewable energy becomes imperative. Renewable energy, derived from natural processes that are replenished constantly, includes solar, wind, geothermal, and hydroelectric power. These energy sources present a promising alternative to fossil fuels, which are finite and environmentally damaging. According to the International Energy Agency (IEA), global...
368
Over the last few decades, concerns have been raised on whether renewable energy is green and beneficial, especially during this period when there are heightened efforts to reduce greenhouse gas emissions. Several bills have been sponsored to address the problem of sustainable energy sources; for instance, the former member of the West Virginia House of Delegates Marty Gearheart introduced the...
114
Get a unique paper that meets your instructions
800+ verified writers can handle your paper.
Place an order
Energy demand is required to improve peopleâs health, welfare, and meeting economic and social development is on the rise each day. All societies in the world need a form of power to support basic human essentials such as cooking, lighting, communication, mobility, and space comfort (Gielen et al. 2020). Fossils including oil, gas, and coal have been the most dominant...
121
My research question is âCould Europe be powered by renewable energy?â This science in society question falls in the research area of science that has an effect on the environment. The effects of climate change are quickly escalating due to excess greenhouse gasses in our atmosphere that are trapping in excess heat from the sun. A way to reduce emissions...
432
Solar energy is the green source with the widest potential and plays a vital role in developing energy all over the world. Human beings have been making use of solar energy as early as 7th century. Later on, due to the advancements in science and discoveries of alternative sources of energies - mostly non-renewable and fossil fuels, use of solar...
432
Struggling to find the right direction?
Expert writers are here to provide the assistance, insights, and expertise needed for your essay.
History of atom Our journey with the atom model dates back to 442 BC when Greek Philosopher Democritus proposed his theory of matter. While his theory was obviously not based on any observable science, it was entirely dependent on rationalism and was largely inspired by Greek philosophers, Leucippus and Anaxagoras. Democritus enters this discussion facing phenomenal resistance. His proposition so...
112
Safe Sound Level Practical Sound are waves produced by vibrations (OpenLearn, 2017). They can travel through solids, liquids and gases. However, the particles move differently in each of these forms. Sound waves travel fastest in solids, followed by liquids, then lastly gases (Oceanservice n.d). The molecules in solids are the most compacted, enabling sound to travel much faster in solids...
374
In antiquity, philosophers posited a variety of ways in which the physical world is constructed. One such philosophy is that of Atomism, which proposed that the universe was made of indivisible, granular elements: atoms. An early example of a philosopher proposing atomism is Aruni, a Vedic scholar from 8th century BCE India, who theorized that particles too small to be...
214
Get a unique paper that meets your instructions
800+ verified writers can handle your paper.
Place an order
Niels Bohr, who was interested in explaining the spectrum of discrete lines that is observed when light is emitted by different elements. Many models of the atom have been proposed based on experimental data, including J.J. Thomson's discovery of the electron and Ernest Rutherford's discovery of the nucleus. Rutherford explained that in an atom, the nucleus is positively charged and...
233
Abstract Have you ever wonder why ice cubes floats when mixed with water? or when oil stays at the top of the water instead of mixing together? This goes back to 250 B.C when a Greek mathematician named Archimedes discovered density. Density explains the correlation of mass and volume and also when the object is supposed to rise, sink, or...
432
1.0 Introduction Western hemlock is the single most plentiful tree species on the coast of British Columbia and makes up 18% of the volume of BCâs total growing stock. It grows along both the east and west sides of the coast range, from sea level to mid-elevations, as well as in the Interior wet belt west of the Rocky Mountains....
432
Struggling to find the right direction?
Expert writers are here to provide the assistance, insights, and expertise needed for your essay.
Abstract: Advance illumination instruments have changed the scenario in distribution and intensity of lighting systems in this world. Development from fluorescent to white LED (light emitting diode) opens the door of illumination, pest control application and eco-friendly lighting. Color sensitivity in UV spectrum plays crucial role in navigation; meet selection, excitation in terrestrial invertebrate animals. This review shows the importance...
432
Introduction Since its first opening in Paris on July 8, 1817, the rollercoaster remains to be the prime attraction of every modern theme park. The rollercoaster ride focuses on exposing the riders to a variety of magnitudes of forces, at different times, without compromising on the health and safety of the riders. To give maximum enjoyment whilst ensuring safety, manufacturers...
432
Abstract: Heat sink are a kind of heat exchanger used as a cooling system for electronic devices due to simplicity, low cost and reliable manufacturing process. The heat sink can be divided into plate fin, pin fin, cross fin, a combination of plate fin and pin fin, perforated plate fin and pin fin and radial heat sink. In the past...
432
Get a unique paper that meets your instructions
800+ verified writers can handle your paper.
Place an order
Sound: A Basic Introduction What is Sound? Sound can be described as variations in density and pressure that expand in an elastic medium which could be a gas, liquid or solid body. The precondition for variations in pressure to be defined as sound is furthermore that in addition to the source of the sound and the transmitting medium, there should...
271
Abstract â Active street lighting has emerged as an essential factor in strategies for a resource-efficient economy and realization of sustainable growth. In the outdoor area, lights represent approximately 40 % of the total energy consumption at night and have much energy saving potential. If passers-by or vehicles, summarized as traffic elements, are not located near street lamps, it is...
245
Abstract Our theoretical interpretation shows that the electron density is condensed at 150°orientation and perhaps the reason for the high mobility of electron in graphene. To determine the above result, the constructed monolayer of graphene contains 40 carbon atoms with 48 bonds in between them and 16 hexagonal polyhedra and the bilayer of graphene has 80 atoms with 96 bonds...
224
Struggling to find the right direction?
Expert writers are here to provide the assistance, insights, and expertise needed for your essay.
Abstract The main aim of the project is to design a circuit which would allow the detection of light by using a photodiode and to critically assess in details how a light sensing circuit using a photodiode works to obtain a desired output. This is achieved by using a transistor Darlington pair, four resistors (2*330, 1k, 4.7k), one LED and...
432
Abstract Polymers represent a good alternative option for current metallic heat exchangers. That is due to their low weight ,cost, and volumetric-thermal-capacity. Polymers also considered as stable anti-corrosive material. Furthermore, fouling is less likely to stick on polymer surface compared to metals. However, polymers thermal conductivity is way less that metals (more than 100 times). Several researches in the literature...
315
Abstract The topic of this paper that I want to specifically talk about is Newtonâs Second Law of Motion and how his theory would show how the forms of mass, acceleration, and force would all coexists amongst each other whether that be finding the acceleration of an object on a particular surface or to measure the applied force on the...
432
Get a unique paper that meets your instructions
800+ verified writers can handle your paper.
Place an order
Introduction What is the speed of light and what affects? This question has been asked for hundreds of years and the answer is simple. The speed of light is approximately 299,792,458 m/s (Las Cumbres Observatory, 2019). This answers the first part of the question, but what about the second part? What affects the speed of light? The purpose of this...
432
What are the consequences of different approaches to recording sound? Sound can be manipulated by various techniques. In Jack Walker's seminar, a variety of these techniques were explored such as creative microphone placements, processing and textures. He also discusses the effect of changing the equipment and space when recording. I will discuss a few of his approaches when recording. When...
231
Introduction The reason for this lab report is to inform how Newtonâs laws of motion can detail human movement. Analysing and understanding movement is important for sports science movement is the effect of force generated in a push and pull pattern between two objects. Forces can change speed or direction of an object. Within this report I will evaluate the...
432
Struggling to find the right direction?
Expert writers are here to provide the assistance, insights, and expertise needed for your essay.
Introduction The study of rock density is pivotal in the field of geology, offering insights into the composition, structure, and genesis of rocks. Density, defined as mass per unit volume, varies among different rock types and influences their behavior under various environmental conditions. This property is crucial in applications such as petroleum exploration, civil engineering, and environmental science. According to...
432
Introduction The purpose of this scientific report was to look at the movement of the hip joint in the eccentric phase of a squat and the external forces that act on it and to further investigate the role that biomechanics has had in the research and the development of a squat. Key Terms Biomechanics can be defined as the study...
432
This case study work focuses on recognising and quantifying internal heat sources in the first European analog space base: the recently constructed Ppolish LUNARES habitat. The paper explains the necessity of conducting analog space missions prior to an actual manned exploration of the Moon and Mars. Notions of internal heat loads and gains have been elaborated along with their significance...
383
Get a unique paper that meets your instructions
800+ verified writers can handle your paper.
Place an order
Abstract When a body is in a state of motion, the total momentum is maintained, such that the product of mass and the velocity vector, until that moment when an external force is applied to it. This law is called the conservation of linear momentum, this principle somewhat corroborates the conservation of energy principle which states that energy is neither...
432
Abstract: Geothermal energy is one of the cleanest non-conventional energy source. A promising application of harnessed geothermal energy are âground source heat pumps(GSHP)â. Ground source heat pumps can be used for both commercial applications as well as domestic applications, the key reason being the fact that they are highly energy efficient, energy saving capabilities and their environment friendliness. The use...
432
Lab Report 1. Introduction 1.1 Background Information: Newtonâs second law of motion states that the acceleration of an object depends on two variables: the net force acting on the object and mass. The acceleration of an object is dependent directly upon the net force acting on the object, and inversely to the mass of the object. Acceleration is the total...
432
291
